Current Location > HOME > NEWS > New Products Releases
New product| Alctron SC230N isolated signal splitter

                          Product introduction

SC230Nis a isolated signal splitter that will let you split a XLR input to 2 XLRbalanced outputs. Each balanced output has ground lift switch to aid inelimination of ground loops.


Highdelicate output signal with low noise electronics line: the professional audiotransformer comes with smooth frequency response, low distortion and reducingradio frequency interference. Two channels balanced output level pure andnatural, compared with unbalanced signal, less signal interference andtransmission longer.

LIFT-GND: each channel has LIFT-GND switchused to isolate input and output ground noise which makes output signal more pure.

Except powerful function, the detailed design is alsowonderful.

The concise appearance, impact resistance:SC230N shell adopts alum material, its lightweight style owing impactresistance ability to reduce radio signal interference.

Anticollision design ensures long time using:each side comes with protection panel to prevent product drop and collisionwith other devices. This design ensures product’s long time using.




1.      INPUT: XLR balanced signalinput connector.

2.      THRU: balanced signal outputconnector.

3.      0 +180°:dial to the 0 it indicates that the input and output phase is thesame; dial to the 180°it indicatesthat the input and output phase is opposite.

4.      OUTPUT A: A XLR balanced signaloutput connector.

5.      OUTPUT B: B XLR balanced signaloutput connector.

6.      LIFT GND: disconnect inputground output to stop hum and buzz.



Frequency response: 20hz-20khz

Max input level: +20dBu(1%50hz)

Distortion: 0.002%(0dB 1khz)

Insertion loss: -2.5dB into 600 ohms load; <0.1 dB into 50kohms load


Productpacking list


Note: SC230N isolated signal splitter, manual, warrantycard and certificate